ACMER P1 10W Laser Engraver , Assembly and Test, Easily Cuts 19 mm Spruce Wood

The output power of the P1 laser is increased to 10W, but it still achieves the 0.08mm focus of the through laser beam shaping technology, which means the P1 has higher energy density, stronger cutting penetration and engraving capabilities.

The advanced air-assisted and high-power P1 laser can speed up material burning and residue removal, greatly improve cutting performance, and make laser cutting faster and cleaner.

The architecture of the P1 engraver uses the 2040 profile, which is solid and the operation is smooth; Premium track with a powerful motor, smoother when engraving and carving the object. 400 x 410 mm large work surface to meet various engraving needs.

P1 high speed air assist and high energy density lasers increase cut penetration. Available to cut multiple materials and also easier to process high density wood such as MDF, walnut, which are difficult for conventional lasers.

This machine works well with LightBurn and LaserGRBL, supports Windows, MacOS, iOS and Android, the engraving file supports SVG, NC, BMP, JPG, PLT, PNG, etc.

Built-in ESP-32-DOWD-VS chip, LX6 32-bit microprocessor, the machine supports operation via WIFI, TF card and USB connection. Simply connect and control it, no messy cables needed. P1 equipped with emergency stop switch and overturning protection device, which can stop work immediately if any abnormality is detected during carving.